H110 Review

This is a fine ball type powder that is "ideal" as in "nearly perfect" for light bullets in 300 Blackout if you want SUPERSONIC loads

I highly recommend this powder for supersonic, light loads. This site does not touch on this topic, but looking at gel testing for decades...I can easily say that the 300 BLK 110 polymer Tip supersonic bullet going over 1600 FPS is "better" than ANYTHING in 5.56 in terms of gel block testing, Superb load. Superb.

These shots below, are ALL with Adams Arms piston kit for 300 blk.

@ 50 yards

You cannot "max" out velocity if you are using heavier bullets in this caliber. This is because you simply cannot fit enough in the case. For 110 Grain bullets, its already compressed.

OAL is 2.090
Bullet is Polymer Tip 110 Grain
Primer is Federal Match
Nickel/Brass cases.

19.8 with Nickel and Brass seems to be a lights out load. at around 2150 FPS in a 9.5" barrel, that is really good.

Hodgdon has a winner for a powder here. If you are doing light bullets?+ Probably up to like 125 grains at most or so, this powder is as close to ideal as you will get.

Velocity, meters superbly, not too dirty and its accurate? What else do you want.

Finding the loads...

This was shot BEFORE the above target. 19.8 still the go to load. So its consistently the best. And this was with MIXED primed brass from pulldowns!